Eureka PROMETHEUS Gebrauchsanweisung Seite 47

Once the calibration has been confirmed, and the lever of the coffee bean
container (2) has been closed, the motor will start.
ATTENTION
It is best to perform the zero calibration only at the first activation and
after replacing the burrs.
9.8 STANDBY
From this screen, it is possible to activate the standby mode.
• OFF: Mode deactivated.
• ON: Mode activated.
The waiting time can be set using the + and - keys. Once in standby mode,
only the Eureka logo will remain visible on the screen. To exit the standby
mode, press on the screen.
9.9 PASSWORD
This screen allows setting the password for the appliance. When enabled, the
password will be needed to access the technical menu, to lock / unlock the
settings as well as to disable the password itself.
• OFF: password disabled.
• ON: password enabled.
To set the password, enter a code consisting of 5 digits; to confirm it, enter the
25