imilab C21 Bedienungsanleitung Seite 6

Installing the Device
• Installing a MicroSD Card
Ensure that the camera is disconnected from the power supply. Adjust the
camera lens upward until the MicroSD card slot is revealed. Insert the
MicroSD card into the card slot in the direction as illustrated.
Note:
1.The MicroSD card needs to be purchased separately. The camera can be
used without a MicroSD card.
2.When inserting or removing the MicroSD card, please disconnect the
camera from the power supply. Use a MicroSD card from a reputable
manufacturer (up to 256GB). The recommended read and write speed of the
MicroSD card is at least U1/Class 10.
• FAQ
Scan the QR code for Frequently Asked Questions.
• Installing the Device
The device can be placed on a number of horizontal surfaces, such as a writing
desk, dining room table, and co ee table. It can also be mounted on the wall.
RESET
04
RESET
MicroSD