PCE Instruments PCE-HVAC 2 Bedienungsanleitung Seite 36

5.3.4 Change the display mode
To change the measuring parameters which can be accessed by pressing "P/V/F", follow these
steps:
If you are in the settings menu, use "Unit ▲" and "Unit ▼" to select the menu item
1.
"Type" and press "Avg/Rec" to enter.
2. Here you can choose between 3 different options:
1.
2.
3.
Use "Unit ▲" and "Unit ▼" to select the desired option and press "Avg/Rec" to
3.
confirm.
5.3.5 Clear the memory
To clear the internal memory of the flow meter, follow these steps:
If you are in the settings menu, use "Unit ▲" and "Unit ▼" to select the menu item
1.
"ALL" and press "Avg/Rec" to enter.
Press the "Save/Clear" key to select the measuring parameter of which you wish to
2.
delete all saved data. The following options are available:
PRESS: Clear all pressure data
VEL: Clear all velocity data
FLOW: Clear all air flow data
Press "Unit ▲" or "Unit ▼" until the display shows "YES" and press "Avg/Rec" to
3.
delete the data.
Pressure and air velocity
Air velocity and air flow
Pressure, air velocity and air flow
© PCE Instruments
31