Auto Power Off - Pce Instruments Pce-Hvac 2 Bedienungsanleitung

Change duct dimensions (circular):
If the duct is circular the display shows "D=" and you can adjust the diameter of the
1.
duct. The value is shown on the primary display.
Use "Unit ▲" and "Unit ▼" to move the decimal point.
2.
Press "Save/Clear". The last digit begins to flash. Use "Unit ▲" and "Unit ▼" to
3.
increase or decrease the value. Press "Save/Clear" again to go to the next digit.
Once you have adjusted the diameter to your needs, press "Avg/Rec" to confirm.
5.3.3 Auto power-off
The flow meter comes with an automatic power-off function which turns it off after 20 minutes of
inactivity.
To change the settings of the automatic power-off function, follow these steps:
If you are in the settings menu, use "Unit ▲" and "Unit ▼" to select the menu item
1.
"SLP" and press "Avg/Rec" to enter.
The display now shows either "ON" (auto power-off active) or "OFF" (auto power-off
2.
inactive).
Use "Unit ▲" and "Unit ▼" to select the desired option and press "Avg/Rec" to
3.
confirm.
© PCE Instruments
30