Shark PowerDetect IP1251CHT Bedienungsanleitung Seite 28

MAINTAINING YOUR VACUUM
CLEANING THE VACUUM ANTI-ALLERGEN FILTER
NOTE: For best results, clean your filters at least once a month and replace the filters
regularly� To clean filters, clear loose debris and rinse with cold water ONLY to prevent
damage from cleaning chemicals� Allow all filters to dry fully before reinstalling to prevent
liquid from being drawn into electrical parts�
1. To access filter, press the dust cup release
button and remove the dust cup�
14
sha rkclean.eu
2. Pull the release tab to remove the filter for
the vacuum�
3. After cleaning, slide the filter back into the
vacuum�
MAINTAINING YOUR VACUUM
NOZZLE MAINTENANCE
REMOVING SOFT ROLLER
1. Turn off the vacuum�
2. Press the nozzle release button to detach
the nozzle from the wand�
3. Press the soft roller release button and
slide the soft roller out of the nozzle�
4. Clear any blockages and remove any
debris from the soft roller and floor
nozzle�
5. Tap off loose debris and wipe the soft
roller clean with a dry towel� Hand wash
the soft rollerif needed, using only water,
and then let it air dry completely before
reinstalling�
6. When the soft roller is completely dry,
reinstall it into the nozzle by inserting it
into the nozzle until it clicks�
REMOVING SQUEEGUEE
1. Turn off the vacuum�
2. Press the nozzle release button to detach
the nozzle from the wand�
3. Remove rear squeegee by turning screws�
4. Clear our any blockages and debris from
behind the squeegee�
5. Reinstall squeegee and turn screws until
they lock into place�
s ha rkc lea n.eu
15