Shark PowerDetect IP1251CHT Bedienungsanleitung Seite 27

USING YOUR VACUUM
ABOVE-FLOOR CLEANING
ABOVE-FLOOR WITH HAND VACUUM
Detach the hand vacuum to clean above-floor
areas� Press the front latch release button on
the hand vac where it meets the wand, then lift
off the hand vacuum� To attach an accessory
to the hand vacuum, slide it into the opening
in the nozzle� To remove, press the front latch
release button on the hand vac where it meets
the wand, and slide out the accessory�
12
sha rkclean.eu
ABOVE-FLOOR WITH WAND
To detach the floor nozzle from the wand,
step on the nozzle while pressing the
nozzle release button at the bottom of
the wand� Lift the wand to remove it� To
reattach the wand, align it over the neck
of the floor nozzle, then slide it on until it
clicks into place�
MAINTAINING YOUR VACUUM
EMPTYING THE HANDHELD VACUUM DUST CUP (IP1000 SERIES)
To empty the handheld vacuum dust cup,
turn off the power and hold the vacuum
directly over the rubbish bin� Press the
release button and the dust cup lid will drop
open, releasing debris�
CLEANING THE VACUUM DUST CUP
Fig� 1
1. To access the dust cup on your IP1000 or
IP3000 hand vacuum, engage the dust
cup removal button and pull downward
disengage from the hand vacuum (Fig� 1)�
13
s ha rkc lea n.eu