VEVOR EML3500-24L Bedienungsanleitung Seite 8

SUITABLE FOR MOUNTING ON CONCRETE OR OTHER
NON-COMBUSTIBLE SURFACE ONLY.
Install the unit by screwing three screws. It's recommended to use M4 or
M5 screws.
4. Battery Connection
CAUTION: For safety operation and regulation compliance, it's requested
to install a separate DC over-current protector or disconnect device
between battery and inverter. It may not be requested to have a disconnect
device in some applications, however, it's still requested to have
over-current protection installed. Please refer to typical amperage in below
table as required fuse or breaker size.
- 6 -