Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WARNING: Shock Hazard
Installation must be performed with care due to high battery
voltage in series.
CAUTION!! Do not place anything between the flat part of the
inverter terminal Otherwise, overheating may occur.
CAUTION!! Do not apply anti-oxidant substance on the
terminals before terminals are connected tightly.
CAUTION!! Before making the final DC connection or closing
DC breaker/disconnector, be sure positive (+) must be
connected to positive (+) and negative (-) must be connected
to negative (-).
5. AC Input/Output Connection
CAUTION!! Before connecting to AC input power source, please install a
separate AC breaker between inverter and AC input power source. This
will ensure the inverter can be securely disconnected during maintenance
and fully protected from over current of AC input. The recommended spec
of AC breaker is 50A.
CAUTION!! There are two terminal blocks with "IN" and "OUT" markings.
Please do NOT mis-connect input and output connectors.
WARNING! All wiring must be performed by a qualified personnel.
WARNING! It's very important for system safety and efficient operation to
use appropriate cable for AC input connection. To reduce risk of injury,
please use the proper recommended cable size as below.
Suggested cable requirement for AC wires
Please follow below steps to implement AC input/output connection:
1.
Before making AC input/output connection, be sure to open DC
protector or disconnector first.
- 8 -
Werbung
