VEVOR EML3500-24L Bedienungsanleitung Seite 5

operation and prevented from accidentally being put into operation again;
contact qualified maintenance personnel.
Ensure that the connection cables are provided with fuses and circuit
breakers. Never replace a protective device by a component of a different
type. Refer to the manual for the correct part.
Check before switching the device on whether the available voltage source
conforms to the configuration settings of the product as described in the
manual.
Ensure that the equipment is used under the correct operating conditions.
Never operate it in a wet or dusty environment.
Ensure that there is always sufficient free space around the product for
ventilation, and that ventilation openings are not blocked.
Install the product in a heatproof environment. Ensure therefore that there
are no chemicals, plastic parts, curtains or other textiles, etc. in the
immediate vicinity of the equipment.
Transport and storage
On storage or transport of the product, ensure that the mains supply and
battery leads are disconnected.
No liability can be accepted for damage in transit if the equipment is not
transported in its original packaging.
Store the product in a dry environment; the storage temperature should
range from –10°C to 50°C.
Refer to the battery manufacturer's manual for information on transport,
storage, charging, recharging and disposal of the battery.
- 3 -