Power Level function
Select the power level on the app to control the robot vacuum cleaner's suction power during
cleaning. There are four levels of suction power: Off, Eco, Normal, and Turbo.
Cleaning schedule
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
-
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
-
Before setting the time and the options on the robot vacuum cleaner, make sure it is on.
Other Functions
Sleep function
A Do Not Disturb time slot can be selected to control the operation of the robot vacuum
cleaner, and it can be modified or cancelled from the app. During the set time, the robot
vacuum cleaner will disable the automatic, continuous cleaning and timer functions.
Map Editing function
This function allows you to edit generated maps: rename cleaning areas, split or combine
areas, and edit cleaning mode, suction power, and scrubbing level in each selected area.
Robot vacuum cleaner's Location function
Allows to locate the robot vacuum cleaner on the map.
4. CLEANING AND MAINTENANCE
Cleaning the main brush
The main brush rotates at high speed and helps pushing the dirt into the suction mouth.
This brush is in contact with the floor, and therefore with dirt, so it can wear out overtime,
negatively affecting cleaning efficiency. For this reason, it is suggested to replace the main
brush after a maximum of 320 hours or less.
1. Slightly press the main brush frame's tabs to open the main brush compartment and
remove it. Fig. 11
2. Remove hair, lint, and other dirt trapped in the brush and around the shafts with the help
of the self-cleaning brush. Fig. 12
3. Clear and clean the robot vacuum cleaner's suction channel.
4. Reinstall the main brush and its frame.
Recommendation
It is recommended to clean the main brush once a week with the help of the self-cleaning
brush.
Conga 7490 Immortal Home 6 Pack
ENGLISH
63