Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Spiral mode
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific
-
area. It will start cleaning at a specific spot and will move outwards in a spiral motion,
and it will return to the starting spot in an inwards spiral motion again.
-
Once finished, the robot vacuum cleaner will return to the self-emptying base directly.
Before using this mode, place it in the spot you wish to clean.
-
-
Select the spiral cleaning mode on the app.
Square Spiral mode
When this mode is enabled, the robot vacuum cleaner will thoroughly clean a specific
-
area. It will start cleaning at a specific spot and will move outwards in a square-spiral
motion, and it will return to the starting spot in an inwards square-spiral motion.
-
Once finished, the robot vacuum cleaner will return to the self-emptying base directly.
Before using this mode, place it in the spot you wish to clean.
-
-
Select the spiral cleaning mode on the app.
Scrubbing Mode
4. Attach the mop to the bracket and the latter to the mixed tank. Fill up the water tank.
5. Insert the mixed tank into the robot vacuum cleaner and select the cleaning mode and
scrubbing level in the application: off, low, medium, or high.
6. Once you have selected the desired scrubbing level, the robot vacuum cleaner will start
the All in One function to vacuum, scrub, and sweep simultaneously thanks to its mixed
tank.
Note
If you wish to mop, do not fill the water tank.
-
-
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly
with water before fixing it to the mixed tank. It is also recommended to wash the mop
after every use.
It is recommended to be present when the robot vacuum cleaner is scrubbing.
-
-
When the robot vacuum cleaner returns to the self-emptying base, the mop must be
removed. Do not leave the robot vacuum cleaner charging with the mop assembled.
Manual mode
The robot vacuum cleaner can be moved manually by selecting manual mode in the
application and using the arrow keys.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
to the self-emptying base during any cleaning mode. The robot vacuum cleaner will stop
vacuuming until it reaches the self-emptying base.
Conga 7490 Immortal Home 6 Pack
ENGLISH
61
Werbung
