ADE WS 1911 Kurzanleitung Seite 30

Switching the alarm function on/off
− Slide the ALARM1 or ALARM2 switch or both to ON.
The display shows "M-F" or "S-S" or "M-F" and "S-S"
accordingly. The alarm function is activated.
Waking up
At the set time, you will be woken by an alarm signal,
which will become more intense as the waking time
increases.
‚ Stopping the alarm: Press any button on the
base station (except
After 24 hours, the alarm will be triggered again.
‚ Auto-stop function: If you do not press a button, the
alarm switches off automatically after 2 minutes. After
24 hours, the alarm will be triggered again.
‚ Repeat alarm (snooze function): Press the
button once when the alarm signal sounds.
The alarm signal stops according to the setting made
(default setting: 5 minutes). Then the device switches
back on and the alarm sounds again. This procedure
can be repeated multiple times.
14
QSG WS 1911 Druckbuch.indb 30 QSG WS 1911 Druckbuch.indb 30
To deactivate an alarm function, slide the
respective switch to OFF.
) to stop the alarm.
WS 1911 weather station
31.01.2025 13:43:49 31.01.2025 13:43:49