Kindermann USB-C HDBT3 Extender 4K60 Set Inbetriebnahme- Und Bedienungsanleitung Seite 24

EDID:
Description
Set TX EDID
prm = {0 ~ 18}
0: Copy EDID from RX HDMI output (default)
1: 1920x1080p60Hz, Audio 2CH PCM
2: 1920x1080p60Hz, Audio 5.1CH DTS/DOLBY
3: 1920x1080p60Hz, Audio 7.1CH DTS/DOLBY/HD
4: 3840x2160p30Hz 4:4:4, Audio 2CH PCM
5: 3840x2160p30Hz 4:4:4, Audio 5.1CH DTS/DOLBY
6: 3840x2160p30Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
7: 3840x2160p60Hz 4:2:0, Audio 2CH PCM
8: 3840x2160p60Hz 4:2:0, Audio 5.1CH DTS/DOLBY
9: 3840x2160p60Hz 4:2:0, Audio 7.1CH DTS/DOLBY/HD
10: 3840x2160p60Hz 4:4:4, Audio 2CH PCM
11: 3840x2160p60Hz 4:4:4, Audio 5.1CH DTS/DOLBY
12: 3840x2160p60Hz 4:4:4, Audio 7.1CH DTS/DOLBY/HD
13: WUXGA 1920x1200p 60Hz, Audio 2CH PCM
14: DVI 1280x1024p60Hz, Audio None
15: DVI 1920x1080p60Hz, Audio None
16: DVI 1920x1200p60Hz, Audio None
17: User Defined 1
18: User Defined 2
Get EDID of the TX
Get TX EDID data
Write current EDID in custom EDID
prm1 = {0 ~ 2};
0 = User Defined 1 und 2
1 = User Defined 1
2 = User Defined 2
prm2 = one block of 256 bytes edid in Hex
Get Custom EDID
prm = {0 ~ 2};
0 = User Defined 1 und 2
1 = User Defined 1
2 = User Defined 2
24
Example of
Command feedback
SET TX Set TX input EDID to
EDID to prm 00_Copy EDID from RX
<CR><LF> HDMI output (default)
TX input EDID to 00_
GET TX EDID
Copy EDID from RX
<CR><LF>
HDMI output (default)
GET TX
TX input EDID
EDID DATA
<00 FF FF FF...>
<CR><LF>
SET USER
USER defined 1
EDID prm1
<prm2>
EDID is loaded
<CR><LF>
GET USER
USER defined 1 EDID
EDID prm
<00 FF FF FF...>
<CR><LF>
EN