Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3 Disposal and return of the device
Disposal of the device: Disposal of used electrical and electronic equipment
(applicable in the countries of the European Union and other countries with a
separate collection system for this equipment).
The symbol of the crossed-out dustbin on the product indicates that this product must
not be treated as normal household waste but must be taken to a collection point for
the recycling of electrical and electronic equipment.
The environment and health can be permanently damaged by the incorrect disposal of
electronic components. By helping to dispose of this product correctly, you are making
an important contribution to protecting nature and your fellow human beings. Mate-
rial recycling helps to reduce the consumption of valuable raw materials. For more
information on recycling, please contact your local council, municipal waste disposal
service, or the retailer through whom you purchased this product.
Return concept: The device can be returned to Kindermann for disposal free of
charge. Please contact our service department for smooth processing.
We want to point out that the user is solely responsible for deleting any personal or
otherwise protected data from the device before disposal.
4 Introduction
The USB-C HDBT3 Extender 4K60 Set transmits USB-C data and video signals as well
as USB 2.0 signals. It supports transmission up to 70 m for 4K30Hz (4:4:4 8bit) and 40
m for 4K60Hz (4:4:4 8bit) over a single CAT6A/7 cable. The transmitter has one USB-C
input and 3 local USB device ports. The receiver has 4 USB device ports.
The USB-C input supports DP alt-mode standards (v1.2a), USB 2.0 data and up to 60
watts of charging power.
The receiver has an HDMI output and 4 USB device ports. RS-232 signal transmission
is also supported. The bi-directional 48 V PoC function allows power to be supplied to
the transmitter or receiver.
EN
17
Werbung
