Herunterladen Diese Seite drucken

EuroLite LED IP T-PIX 16 QCL Beam Bar Bedienungsanleitung Seite 31

Wetterfeste (ip65) beam bar mit rgbl-farbmischung und pixelansteuerung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

INSTALLATION
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be placed on the floor or fastened to a truss or similar rigging structure. The device must
never be fixed swinging freely in the room.
1
The rigging structure must support at least 10 times the weight of all fixtures to be installed on it.
2
Block access below the work area and work from a stable platform when installing the device.
3
Use rigging hardware that is compatible with the structure and capable of bearing the weight of the
device. Please refer to the "Accessories" section for a list of suitable rigging hardware.
Screw one cloupler via an M10 screw and self-locking nut onto the Omega bracket.
Insert the quick-lock fasteners of the Omega bracket into the respective holes on the mounting bracket.
Tighten the quick-lock fasteners fully clockwise.
2
1
4
4
Secure the device with a safety bond or other secondary attachment. This secondary safety attachment
must be sufficiently dimensioned in accordance with the latest industrial safety regulations and
constructed in a way that no part of the installation can fall down if the main attachment fails. An
appropriate eyelet is mounted on the device for fixation of the safety bond. Fasten the safety bond in
such a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
5
To align the device, release the fixation screws at the mounting bracket, adjust the desired inclination
angle and tighten the fixation screws.
6
After installation, the device requires inspections periodically to prevent the possibility of corrosion,
deformation and looseness.
2
1
4
(1) Omega bracket
(2) Coupler
(3) Safety bond
(4) Quick-lock fastener
31/48
3
00158372, Version 1.0
2
4
1

Werbung

loading

Diese Anleitung auch für:

51914131