Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Open the upper filter cover and re-
move the MIF filter from the dust con-
tainer by pulling it upwards.
Tap or brush light soiling out of the MIF
filter.
If the MIF filter is heavily soiled, wash it
under lukewarm water.
Then allow the MIF filter to dry com-
pletely for at least 24 hours.
To clean the dust filter, you can remove the
entire filter insert and rinse it out under
lukewarm water.
To do this, turn the upper part of the
dust container clockwise. The marking
on the upper part points to the
marking on the dust container. Lift
the dust filter out of the dust container.
To make cleaning easier, the coarse
particle collector can also be un-
screwed, turn the ring clockwise then
pull it downwards and remove.
Rinse out the dust filter under luke-
warm water.
Leave it to dry completely for at least
24 hours.
Fig. 8 – Removing the dust filter
Fig. 9 – Cleaning the MIF filter
Fig. 10 – Removing/cleaning the dust filter
DE
FR
NL
ES
IT
EN
121
Werbung
