Renkforce A-1000 Bedienungsanleitung Seite 34

(3) Infrared recipient REMOTE SENSOR
This sensor receives the infrared signals of the remote control.
Point the remote control at this sensor when transmitting.
(4) Button PRESET EQ
Push this button repeatedly to select one of the following sound settings:
Pop (green)
Rock (red)
Classic (orange)
FLAT (no colour).
(5) Controller VOLUME
This controller adjusts the volume.
While changing the volume, the display FUNCTION (2) visually shows the volume. The display
returns to the marking of the selected audio input after a short time.
(6) Button EXTERNAL PROZESSOR
Push this button to add an equalizer or signal processor connected to the sockets EQ Equalizer into the
signal path.
(7) Controller MIC LEVEL
With this controller, you can set the volume of the microphone connected to MIC (8).
(8) Connection MIC
Use this connection to connect a dynamic microphone.
(9) PHONO button
This button is used to select the phono input.
(10) CD button
This button is used to select the CD input.
(11) Button AV1/AV2
This button is used to select the AV1/AV2 input.
The two inputs AV1 and AV2 are selected by multiple pushes of the button AV1/AV2 (11).
1x pushing > AV1 selected > Display FUNCTION (2) lights up green
2 x pushing > AV2 selected > Display FUNCTION (2) lights up red
34