Crivit CMAFP 10.3 A1 Bedienungs- Und Sicherheitshinweise Seite 12

z Check the charge level of the rechargeable bicycle pump
Switch the rechargeable bicycle pump
„
The number of illuminated bars in the battery symbol on the digital display
„
level of the battery of the rechargeable bicycle pump
When the device is fully charged, all four bars will be lit.
„
z Charging the rechargeable bicycle pump
The rechargeable bicycle pump
„
ate USB AC adapter (operating peak output voltage U
To do this connect the USB cable
„
USB cable with an appropriate USB power connection or an appropriate USB plug socket.
17
During the charging process of the rechargeable bicycle pump
„
in the display flashes
the rechargeable bicycle pump
PLEASE NOTE: USB AC adapter not included in the scope of delivery.
ATTENTION: Please only use the USB cable
PLEASE NOTE: An undervoltage protection circuit is installed in the rechargeable bicycle pump
to protect the device from damage. This prevents a deep discharge of the rechargeable bicycle pump
and automatically switches the device off once the battery is fully discharged. In this case, the device
can no longer be switched on or used. Please recharge the rechargeable bicycle pump
z Using the rechargeable bicycle pump for the first time
Remove the compressed air hose
„
compressed air hose
pump (see Fig. B or D).
1
Do not operate the device in a dusty environment. This is a fire risk and the device could be damaged.
„
PLEASE NOTE: You can either use the compressed air hose
valve adapters , and
13 14
Connecting the compressed air hose without a valve adapter
Screw the free end of the valve connection of the compressed air hose
„
connection valve of the inflatable item.
Connecting the compressed air hose with a valve adapter
The valve adapters
„
(see Fig. C).
First screw the required valve adapter
„
compressed air hose
Connect the valve adapter
„
cap on the inflatable item first if necessary).
Removing the compressed air hose
Connecting without the valve adapters
„
air hose off the valve of the inflatable item.
11
Connecting with the valve adapters
„
valve of the inflatable item. Unscrew the valve adapter
compressed air hose
12
GB/IE/NI/CY/MT
on by pressing the On/Off switch (approx. 3 sec.)
1
can be charged with an appropriate USB A plug or an appropri-
1
to the USB C charging port
17
. When fully charged, the battery symbol (charging bars) in the display
2
will be continuously lit.
1
from its holder
11a
onto the compressed air hose connection
12
supplied in the scope of delivery.
15
, and are located under the cover cap for the accessory compartment
13 14 15
,
13
.
11
, or to the connecting valve on the inflatable item (remove valve
13 14 15
,
13
,
13 14
(if necessary, reattach the valve cap on to the inflatable item).
11
.
1
5 V
out, max
10
1
delivered with the device.
17
. Screw the threaded connection of the
18
11a
or to the free end of the valve connection of the
14 15
or : Unscrew the valve connection of the compressed
14 15
or : First undo the valve adapter from the connecting
15
, or
13 14
indicates the charge
2
).
of the device. Then connect the
the battery symbol (charging bars)
as described.
1
of the rechargeable bicycle
8
directly or use it together with the
directly on to the
11
off the valve connection of the
15
.
7
of
2
1
1
16