Electrolux IG2085SN Benutzerinformation Seite 52

ECOMETER indicator
In order to switch the ECOMETER on or off:
1. Activate the Setting mode.
2. Tap the Extra Freeze button repeatedly to
switch ECOMETER indicator off or on.
The indicator will alternately show
and either for the enabled or
the disabled ECOMETER indicator.
3. Exit the Setting mode.
Button sounds
To enable or disable the sounds:
1. Activate the Setting mode.
2. Tap the temperature indicator until the
display shows
button repeatedly to switch the sounds
either on or off. The display alternately
shows and
for the disabled sounds.
3. Exit the Setting mode.
Temperature units
To change the temperature unit:
1. Activate the Setting mode.
2. Tap the temperature indicator until the
display shows
button repeatedly to select between
for Celsius and
3. Exit the Setting mode.
Rest mode
The Rest mode ensures food preservation
while minimizing energy consumption during
periods of non operation.
To switch on the Rest mode:
1. Activate the Setting mode.
2. Tap the temperature indicator until the
display shows
button repeatedly to switch the Rest
mode on or off. The display alternately
shows and
for the disabled Rest mode.
3. Exit the Setting mode.
52 ENGLISH
for
. Tap the Extra Freeze
for the enabled or
. Tap the Extra Freeze
for Fahrenheit.
. Tap the Extra Freeze
for the enabled or
The Rest mode activates after 3 days without
interaction with the appliance, deactivates
automatically after any interaction with the
appliance, remains active once the power is
restored after a power failure.
Sabbath mode
Sabbath mode disables the following features
during religious holidays:
• all buttons except for the button
combination necessary to deactivate the
mode
• sound, except for the High temperature
alarm
• alarm indicators, except for the High
temperature alarm.
To switch on the Sabbath mode:
1. Activate the Setting mode.
2. Tap the temperature indicator until the
display shows
button repeatedly to switch the Sabbath
mode on or off. The display alternately
shows and
for the disabled Sabbath mode.
3. Exit the Setting mode.
After switching on the Sabbath mode, the
display shows ECO indicator and
Accessing any other setting is blocked.
Press and hold the ECO button for approx. 3
sec to switch off the Sabbath mode.
Factory settings
This function restores each setting to the
factory default settings. To restore the factory
default settings:
1. Activate the Setting mode.
2. Tap the temperature button until the
display shows
button until the display shows
turns into blinking
, which indicates that factory settings
are restored.
3. Exit the Setting mode.
. Tap the Extra Freeze
for the enabled or
.
. Tap the Extra Freeze
.
and then into