Environmental Concerns - AEG S83800CTM0 Benutzerinformation

24

Environmental concerns

10. Install the handle in the opposite side.
Re-screw the handle bracket on the
door (h4). Turn the handle bracket with
the handle and screw them to the door
(h5) and the fitted handle bracket (h6).
11. Re-insert the lower door on the lower
hinge pivot (b2).
12. Insert the middle hinge (m2) into the
left drill of the lower door.
13. Unscrew the upper hinge pivot (t1) and
place it on the opposite side.
14. Fit the upper door on the upper door
pivot.
15. Re-insert the upper door on the middle
hinge pivot (m5) slightly tilting both
doors.
16. Re-screw the middle hinge (m2). Do not
forget the plastic spacer (m1).
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the gasket.
In case you do not want to carry out the above mentioned operations, contact the nearest
After Sales Service Force. The After Sales Service specialist will carry out the reversibility of
the doors at your cost.
ENVIRONMENTAL CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
on the product or on its packaging indicates that this product may not be
h4 h5 h6
t1