Useful Information - Atlas Copco Rab 12 L150 Produktanweisungen

RAB 12 L
Brand
Texaco
Molycote
Overhaul
The tool should be checked regularly at six-monthly intervals. If it is in heavy duty service or not running
properly, it should be taken out of service more often for inspection.
Be particularly careful with the speed governor. Incautious treatment can cause it to be out of action
with overspeeding as the result.
Clean the strainer in the inlet adapter regularly to prevent choking with resultant decrease in capacity.

Useful information

Log in to Atlas Copco www.atlascopco.com
You can find information concerning our products, accessories, spare parts and published matters on our
website.
Ergonomic guidelines
Consider your workstation as you read through this list of general ergonomic guidelines and see if you can
identify areas for improvement in posture, component placement, or work environment.
■
Take frequent breaks and change work positions frequently.
■
Adapt the workstation area to your needs and the work task.
■
Adjust for convenient reach range by determining where parts or tools should be located to avoid
static load.
■
Use workstation equipment such as tables and chairs appropriate for the work task.
■
Avoid work positions above shoulder level or with static holding during assembly operations.
■
When working above shoulder level, reduce the load on the static muscles by reducing the weight
of the tool, using for example torque arms, hose reels or weight balancers. You can also reduce
the load on the static muscles by holding the tool close to the body.
■
Make sure to take frequent breaks.
■
Avoid extreme arm or wrist postures, particularly for operations requiring a degree of force.
■
Adjust for convenient field of vision by minimizing movement of the eyes and head during the work
task.
■
Use the appropriate lighting for the work task.
■
Select the appropriate tool for the work task.
■
Use ear protection equipment in noisy environments.
■
Use high-quality inserted tools or consumables to minimize exposure to excessive levels of vibration.
■
Minimize exposure to reaction forces.
■
When cutting:
A cut-off wheel can get stuck if the wheel is either bent or if it is not guided properly. Make sure to
use the correct flanges for cut-off wheels and avoid bending the wheel during cut-off operation.
■
When drilling:
EN
General purpose
Bearings
Multifak EP2
BR2 Plus
© Atlas Copco Industrial Technique AB - 9836 9734 01
Safety and operating instructions
Air lubrication
Aries 32
See "Lubrication" in
Operating instructions
7