GB
Attach the dust extractor
CAUTION! Health hazard due to dust!
Use a special extractor when extracting par-
ticularly harmful or dry dusts.
Note: The vacuum cleaner must be suitable
for the material to be processed.
– Connect the suction tube of the vacuum cleaner
to the suction nozzle (2).
Operation
Check before switching on!
Check the safe condition of the device:
– Check whether there are any visible defects.
– Check whether all parts of the product are firmly
attached.
Switching on/off
– Switching on: Set the On/Off switch (1) to posi-
tion [1].
– Switching off: Set the On/Off switch (1) to posi-
tion [0].
Sanding
DANGER! Risk of death through electric
shock! Only use the product for dry sand-
ing.
Note: Excessive imprints do not lead to
increased sanding performance, but leads
to increased wear of the product and the
sanding disc.
Fault/malfunction
Product not running.
Sanding power too low.
If you can't fix the fault yourself, contact your nearest
vendor. Please be aware that any improper repairs
will also invalidate the warranty and additional costs
may be incurred.
Disposal
Disposal of the appliance
A crossed-out wheelie bin icon means: Bat-
teries and rechargeable batteries, electrical
or electronic devices must not be disposed of
with household waste. They may contain
substances that are harmful to the environ-
ment and human health.
Consumers must dispose of waste electrical devices,
spent portable batteries and rechargeable batteries
separately from household waste at an official collec-
tion point to ensure that these items are processed
correctly. The product can be returned free of charge
in accordance with the legal requirements, for exam-
ple through a municipal waste disposal company or a
dealer.
18
– Clamp in the workpiece or hold it firmly.
– Switch on the product and press it against the sur-
– Always use constant motion and only use light
Cleaning
Cleaning at a glance
Regularly, depending on the conditions of use
What?
Clean dust from the mo-
tor's ventilation slots.
Clean the device.
Troubleshooting
If something doesn't work...
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the ven-
dor. You will save yourself a lot of trouble and possibly
money too.
Cause
Device defective?
Is the sanding disc not suitable for
material?
Sanding disc worn out?
Batteries, rechargeable batteries and lamps
that are not permanently installed in waste
electrical equipment and can be removed in
a non-destructive way must be removed and
disposed of separately before disposal of the equip-
ment. Lithium batteries and rechargeable battery
packs of all systems are only to be handed in to the
waste collection points in a discharged state. The bat-
teries must always be protected against short circuits
by taping off the poles.
All end users are responsible for deleting any per-
sonal data stored on waste devices prior to their dis-
posal.
Disposal of the packaging
The packaging consists of cardboard and
correspondingly marked plastics that can
be recycled.
– Make these materials available for recy-
Note: Always work with the entire surface of
the sanding plate, not just the tip.
face to be sanded applying even pressure.
pressure.
DANGER! Risk of injury! Before all work
on the device, disconnect the mains plug.
DANGER! Caution, risk of injury!
Improper repairs can result in the product
functioning unsafely. This endangers your-
self and your environment.
Remedy
Contact your local vendor.
Replace the sanding disc (► Attach
the sanding disc – p. 17).
cling.
How?
Use a vacuum cleaner,
brush or paintbrush.
Wipe the device with a
slightly damp cloth.