Herunterladen Diese Seite drucken

Technics SH-MX1200 Bedienungsanleitung Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Listening caution
aiv.
Selecting fine audio equipment such as the unit you've just purchased
is only the start of your musical enjoyment. Now it's time to consider
how you can maximize the fun and excitement your equipment offers.
This manufacturer and the Electronic Industries Association's
Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come
through loud and clear without annoying blaring or distortion—and,
most importantly, without affecting your sensitive hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Main FFearures
Sound can be deceiving. Over time your hearing "comfort level"
adapts to higher volumes of sound. So what sounds "normal" can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE
your hearing adapts.
To establish a safe level:
* Start your volume control at a low setting.
* Slowly increase the sound until you can hear it comfortably and
clearly, and without distortion.
Once you have established a comfortable sound level:
* Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or
loss in the future. After all, we want you listening for a lifetime.
This unit is an easy-to operate audio mixer with high sound quality. With 4-channel
input and a variety of built-in functions, its specifications make it suitable for multi-
channel mixing. It is especially adaptable to a club environment.
* Four input channels and microphone input for use
with various sound sources.
* Creative sound production made possible by the
multiple channels—including mic input—and built-in
HIGH, MID and LOW equalizers.
* Full-scope setting of microphone input with the PAN.
* Equipped with TRIM for correcting discrepancies in
source levels.
• 1IN/21N and SIN/AIN 2-channel cross fade potential.
* Provided with HIGH, MID and LOW cut buttons for
master and cross fade, to effectively vary the source
in realtime.
Supplied Accessories
* Connection for an external effector, allowing you to
control specific channels and levels on the mixer side.
* The channel selected with the CUE switch can be
monitored, regardless of the fader setting.
* Two output lines are available, so that you can also
listen to speakers inside a monitor booth.
* A 3-part level meter allows 12-point confirmation of
the right and left master output channels and the
monitor level.
* The respective stereo/mono settings for master and
monitor outputs can be switched. If the monitor is set
to MONO, you can monitor the sound with one ear.
EA
Please check and identify the supplied accessories.
Ыы
[| АС power сога
1рс.
a Sticker

Werbung

loading