Herunterladen Diese Seite drucken

Technics SH-MX1200 Bedienungsanleitung Seite 3

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE SCREWS.
NO USER-SERVICEABLE
PARTS
INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
Before using this unit please read these operating instructions
carefully. Take special care to follow the warnings indicated on the
unit itself as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Safety
1.
Power Source—The unit should be connected to power supply
only of the type described in the operating instructions or as
marked on the unit.
2.
Potarization—If the unit is equipped with a polarized AC power
plug (a plug having one blade wider than the other), that plug will
fit into the AC outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try reversing the
plug. И the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of
the polarized plug.
3.
Power Cord Protection—AC
power supply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Never take hold of the plug or
cord if your hand is wet, and always grasp the plug body when
connecting or disconnecting it.
4.
Nonuse Periods—When the unit is not used, turn the power off.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Installation
Environment
t.
Water and Moisture—Do
not use this unit near water—for
example, near a bathtub, washbowl, swimming pool, or the like.
Damp basements should also be avoided.
2.
Heat—The unit should be situated away from heat sources such
as radiators and the like. It also should
not be placed in
temperatures less than 5°C (41°F) or greater than 35°C (95°F).
Placement
1.
Ventilation—The unit should be situated so that its location or
position does not interfere with its proper ventilation. Allow 10 cm
(4") clearance from the rear of the unit.
2. Foreign Material—Care should be taken so that objects do not
fall into and liquids are not spilled into the unit. Do not subject this
unit to excessive smoke, dust, mechanical vibration, or shock.
3.
Magnetism—
The unit should be situated away from equipment or
devices that generate strong magnetic fields.
|
The lightning flash with arrowhead symbol, with-
in an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accom-
panying the appliance.
4.
Stacking—Do
not place heavy objects, other than system
components, on top of the unit.
5.
Surface—Place the unit on a flat, level surface.
6.
Carts and Stands—The unit should be used only
with a cart or stand that is recommended by the
manufacturer. The unit and card combination
should
be moved
with care.
Quick
stops,
excessive force, and uneven surfaces may cause
the unit and cart combination to overturn.
7.
Wall or Ceiling Mounting—The unit should not be mounted to a
wall or ceiling, unless specified in this operating instructions.
Maintenance
Clean the cabinet, panel and controls with a soft cloth lightly
moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder or Solvent such
as alcoho! or benzine.
Service
1.
Damage Requiring Service—The unit should be serviced by
qualified service personnel when:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects have fallen or liquid has been spilled into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not appear to operate normally or exhibits
a marked
change in performance; or
(e) The unit has been dropped, or the enclosure damaged.
2. Servicing—The user should not attempt to service the unit
beyond that described in the operating instructions. All other
servicing should be referred to an authorized service personnel.

Werbung

loading