Herunterladen Diese Seite drucken

Genmitsu CNC Router 3018- PROVer Mach3 Bedienungsanleitung Seite 27

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Step 3: Slide the board horizontally
to leave about 30mm of space between the board and the left edge of the machine as
shown
below.
Step 4: Now you can tighten all (4) M3 8mm bolts so the T-Slot nuts lock the board into the frame
30mm
26

Werbung

loading

Verwandte Produkte für Genmitsu CNC Router 3018- PROVer Mach3