Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.6 Install Y-Axis Base to X I Z Axis Gantry
What you will need
(12) M5
42
Spacer Template Tool
14mm
Bolt
Step 1: Set the X-Axis / Z Axis Gantry over your Y-Axis Base Assembly
Step 2: Place the Acrylic Spacer template underneath
See through the six pre-drilled
Allen Wrench
28
4mm
the gantry to prop a side up at a time.
holes on the side of the gantry to make sure they align with the nuts positioned
Set,
X-Axis/Z-Axis
Gantry
as shown below.
Y-Axis Base Assembly
before in 2.5 before
Werbung
