Refco ENVIRO Bedienungsanleitung Seite 4

2.2 Important Safety Instructions
Please read and follow all safety instructions and installation
instructions carefully and read it completely before the job.
REFCO products have been specially developed and
manufactured for handling by trained refrigeration fitters and
refrigeration technicians. Due to the high pressures and the
chemical and physical gases used in refrigeration systems,
REFCO disclaims all responsibility and liability for accidents,
injuries, and death. REFCO expressly points out that the
products should only be sold to professionally trained specialists.
2.3 Explanation of Symbols
Warning
Indicates a potentially hazardous situation, which, if not
avoided, may result in serious injury.
Danger
Indicates an electrical hazard. Failure to observe the safety
instructions may result in serious or fatal injury.
2.4 Safety Instructions
2.4.1 Product Safety
The ENVIRO has been designed to meet the requirements of
the Standard for Refrigerant Recovery Machines, ARI and CE
certification. If an approved cylinder with overfill is not available
always use an approved scale to monitor the cylinders capacity.
Additionally, approved refrigerant hoses must be used which
have shut-off devices within 300 mm of the ends to reduce the
likelihood of refrigerant leakage to the atmosphere when
changing cylinders or setups.
Instruction Manual 3