2.5.3. Unfolding/Folding the backrest (D200 Split)
CAUTION
6
Risk of injuries
• Make sure that the backrest is securely locked before use.
2.5.3.1. Folding the backrest
1.
Hold the backrest tube and press lever
backrest tube (3).
2.
Lower the upper backrest tube
2.5.3.2. Unfolding the backrest
1.
Lift the backrest tube
2.
Make sure that the backrest is securely locked into place.
2.5.4. Mounting the rear wheels
Take the rear wheel and push button (1).
1.
2.
Keep the button pushed in and mount the rear wheel axle until it stops.
3.
Release the button.
4.
Check that the wheel is secured.
User manual | 2025-03
(1)
(2)
until it is fully folded.
(2)
up until it is locked.
on the backrest tube until it is sprung up from the
14
D200, D200 30°