Technics SL-L1 Bedienungsanleitung Seite 5

in order to avoid damage due to vibration or shock incurred
during shipment, this unit is packed with protective materials
Dd. @ . O and © Be sure to remove these before use.
Keep these materials for reuse should it become necessary to
transport the turntable again.
1. Remove turntable spacers @¥) ~ €® . (Fig. 1)
2. Pull off the tonearm protection spacer @. (Fig. 1)
3. Remove tape on side of cartridge @. (Fig. 1)
(This prevents the stylus assembly from shaking loose
during shipment.)
Do not stand this unit on its side or turn it upside
down when making connections as the turntable
mat could come loose and damage the stylus.
Placement
B® Place the unit in a stable and horizontal position where
there is little or no vibration.
@ Place it in a well-ventilated location.
Connections
Precautions
3. Plug the female end of the power cord into the turntable's AC
IN jack and plug the other end into a wall socket. (Fig. 2)
,
Wall socket
Rear panel of amplifier (option)
Fig. 2
(The configuration of AC power plug may differ according to
the area.)
Caution:
Make sure that the turntable's AC line-voltage selector is
matched
to your local voltage before connecting
the AC
power plug. ,