Functional specifications
Power Up
Power Up Screen
Upon power up, the clock led flashes.
In this mode the oven is inoperative.
Pushing the knob for about 3 seconds
activates manual mode, the clock led
will turn off. Device will be in stand-by
mode.
Time Of Day Setting
Time Of Day Adjustment Screen
Push the knob until the clock symbol
flashes to enter clock adjustment.
Clock setting is only allowed when no
alarm or cooking time is set.
The clock can be set by turning the
knob right or left. The last set clock will
be the current time.
Alarm Setting
Alarm Setting Screen
Push the knob until the bell symbol
flashes to enter alarm setting. Alarm
can be set by turning the knob right or
left.
After adjustment the knob needs to
be pushed to activate alarm. At this
menu if the knob is not switched on
within 10 seconds, the device switches
to standby mode and the is cancelled.
On main screen, the bell symbol will be
on if the alarm is set.
Push and release the knob to see the
remaining time until the alarm will
sound. Second hand and minute hand
will show the set alarm time for a
period of 2 seconds and then will show
the current time again.
Push the knob for about 2 seconds to
cancel the set alarm. Maximum alarm
time is 3 hours.
Minimum alarm time is 2 minutes.
Timed Start Cooking Setting
Timed Start Cooking Adjustment
Screen
Push and release the knob until the
start symbol flashes to enter timed
start cooking setting.
Cooking start time can be set by
turning the knob right or left.
At this menu if the knob is not
switched on within 10 seconds, the
switches to standby mode and the
EN - 16