Electrical Connection And Safety - Vestel Bo 7688 Rb Gebrauchsanweisung

2.3 Electrical Connection
and Safety
WARNING: The electrical
connection of this appliance
should be carried out by an authorised
service person or qualified electrician,
according to the instructions in this
guide and in compliance with the
current local regulations.
WARNING: THE APPLIANCE
MUST BE EARTHED.
• Before connecting the appliance
to the power supply, the voltage
rating of the appliance (stamped
on the appliance identification
plate) must be checked for
correspondence to the available
mains supply voltage, and the
mains electric wiring should be
capable of handling the appliance's
power rating (also indicated on the
identification plate).
• During installation, please ensure
that isolated cables are used. An
incorrect connection could damage
your appliance. If the mains cable
is damaged and needs to be
replaced this should be done by a
qualified personnel.
• Do not use adaptors, multiple
sockets and/or extension leads.
• The supply cord should be kept
away from hot parts of the
appliance and must not be bent or
compressed. Otherwise the cord
may be damaged, causing a short
circuit.
• If the appliance is not connected
to the mains with a plug, a all-
pole disconnector (with at least
3 mm contact spacing) must be
used in order to meet the safety
regulations.
• The appliance is designed for a
power supply of 220-240V If
your supply is different, contact
the authorised service person or a
qualified electrician.
• The power cable (H05VV-F) must
be long enough to be connected to
the appliance, even if the appliance
stands on the front of its cabinet.
• Ensure all connections are
adequately tightened.
• Fix the supply cable in the cable
clamp and then close the cover.
• The terminal box connection is
placed on the terminal box.
Brown
EN - 11
Blue
Yellow+Green