2. INSTALLATION AND
PREPARATION FOR USE
WARNING : This appliance must
be installed by an authorised
service person or qualified technician,
according to the instructions in this
guide and in compliance with the
current local regulations.
• Incorrect installation may cause
harm and damage, for which
the manufacturer accepts no
responsibility and the warranty will
not be valid.
• Prior to installation, ensure that
the local distribution conditions
(electricity voltage and frequency)
and the adjustments of the
appliance are compatible. The
adjustment conditions for this
appliance are stated on the label.
• The laws, ordinances, directives
and standards in force in the
country of use are to be followed
(safety regulations, proper
recycling in accordance with the
regulations, etc.).
• If the product contains removable
shelf guides (wire racks) and the
user manual includes recipes like
yoghurt, the wire racks shall be
removed and the oven operated in
the defined cooking mode. Removal
of the Wire Shelf information is
included in the CLEANING AND
MAINTENANCE section.
2.1 Instructions for the Installer
General instructions
• After removing the packaging
material from the appliance and
its accessories, ensure that the
appliance is not damaged. If you
suspect any damage, do not use it
and contact an authorised service
person or qualified technician
immediately.
• Make sure that there are no
flammable or combustible materials
in the close vicinity, such as
curtains, oil, cloth etc. which may
catch fire.
• The worktop and furniture
surrounding the appliance must
be made of materials resistant to
temperatures above 100°C.
• The appliance should not
be installed directly above a
dishwasher, fridge, freezer,
washing machine or clothes dryer.
2.2 Installation of the Oven
The appliances are supplied with
installation kits and can be installed
in a worktop with the appropriate
dimensions. The dimensions for hob
and oven installation are given below.
A (mm)
557
B (mm)
550
C (mm)
595
D (mm)
575
E (mm)
576
EN - 9
min./max. F (mm)
min. G (mm)
min. H/I (mm)
min. J/K (mm)
560/580
555
600/590
5/10