Maße - VEGA VEGAFLEX 81 Betriebsanleitung

FF desciptor
APPLICATION_CONFIG_
SERVICE
LEVEL_ECHO_INFO
DEVICE_STATUS
FALSE_SIGNAL_LIMITS
USER_PEAK_ELEC_TEMP
USER_MIN_MAX_PHYSI-
CAL_VALUE
RESET_PEAK_PHYSICAL_
VALUE
RESET_LINEARIZATION_
CURVE
DEVICE_STATUS_ASCII
ECHO_CURVE_PLICSCOM_
REQUEST
ECHO_CURVE_PLICSCOM_
LIMITS
APPROVAL_WHG
DEVICE_STATE_CONFIG
ELECTRONIC_TEMPERA-
TURE
RESET_PEAK_ELECTRO-
NIC_TEMP
FOCUS_RANGE_CONFIG
NOISE_DETECTION_INFO
NOISE_DETECTION_CON-
FIG
ECHO_MEM_SAVE_CUR-
VE_TYPE
ECHO_MEM_STATE
11.3 Maße
Die folgenden Maßzeichnungen stellen nur einen Ausschnitt der möglichen Ausführungen dar.
Detaillierte Maßzeichnungen können auf www.vega.com/downloads und "Zeichnungen" herunter-
geladen werden.
VEGAFLEX 81 • Foundation Fieldbus
Description
Limitation measuring range begin, safety of measuring ran-
ge end
Level echo ID, amplitude, measurement safety
Device status
False signal distance min./max.
Min.-/max.- values of electronics temperature, date
Min.-/max.- distance values, date
Device status
Parameters as curve selection and resolution
Parameters as start and end
Sensor acc. to WHG
Function check, maintenance required, out of specification
Electronics temperature
Width focusing range, time for opening the focusing range, min.
measurement reliability in and outside the focusing range
Increase of the system noise
System noise treatment
Busy, curve type, error code
11 Anhang
Unit
77