WolfVision VZ-8neo Bedienungsanleitung Seite 4

Introduction
The Visualizer offers the possibility to upgrade using an optional Feature Pack which adds additional
functionality. This upgrade is activated by loading a valid Feature Pack code.
Currently available add-on features are:
- Infrared remote control (additional
Picture in Picture Mode for Live to Freeze comparison
internal Memory (9 images)
USB Host port, for memory extension via USB stick
User defined settings can be stored on USB stick (depending on model)
Fading effects, for seamless cross-fading between different image sources
Additional features may be added in the future with later firmware versions.
Where you can get the Code to activate
The Feature Pack code is a unique number and it depends on the serial number ofthe Visualizer.
The code can be supplied by your dealer (together with the Visualizer or separately)
Any questions regarding Feature Pack code availability, please contact either your dealer or WolfVision
directly (contact details on the last page of this manual).
Important note:
The Feature Pack is not pre-installed
Enable the Feature pack by using one of the two following
1. Connect a pre-prepared USB stick to the Visualizer and follow the on-screen instructions
2. Use vSolution Link Software by WolfVision, selecting the Administration tab, and then clicking on
Online/OfflineActivation.
Using the prepared
Connect a power source and a monitor to the Visualizer then switch on the Visualizer
Plug in the USB stick.
- A pop-up message will ask if you want to enable the features.
- Use the navigation keys on the camera head to confirm the line "YES"
Please note that you will not be able to use the remote control until the additional features have been
activated.
Using vSolution
- Install the software vSoIution Link onto your computer—be
- Connecta power source and your PC via USB or LAN tothe Visualizer and start the software.
- Select the ribbon
Online activation requires an internet connection
Offline activation requires the activation file or at least the activation code
For more details please consult the help section ofthe vSoIution Link Software by WolfVision.
Please note that older versions of the software may not support Feature Pack activation.
Latest version can be downloaded from: www.wolfvision.com/support
hardware
USB•Stick
Link Software by WolfVision
"Administration" and click on either
included)
the Feature Pack
and user activation
OR
sure to install administration
Online or Offline
for the software
3
is required!
methods:
functionality.
activation: