STEINEL Spot ONE Bedienungsanleitung Seite 11

Following functions can be set via Smart Remote app:
– Time setting
– Twilight setting
– ON and OFF times
– Automatic/manual control, depending on situation
– Interconnection
– Grouping
– Naming groups and lights
Spot ONE
The slave version has no independent functions of its own.
7� Light tilting/swivelling range / Changing lamp
Light swivelling/tilting range (Fig� 7�1/7�2)
Changing lamp
• Undo glass cover and detach from light enclosure. (Fig� 7�3)
• Disconnect and remove lamp. (Fig� 7�4)
• Insert new lamp and twist to engage. (Fig� 7�5)
• Fit glass cover and turn to engage. (Fig� 7�6)
Important:
Only use GU10 LED lamp with a wattage up to 9 W.
8� Maintenance
The product requires no maintenance.
The light can be cleaned with a damp cloth
(without detergents) if dirty.
9� Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic waste.
G B
1
20
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.
10� Declaration of Conformity
STEINEL Vertrieb GmbH hereby declares that the Spot ONE Sensor Connect/
Spot DUO Sensor Connect radio equipment type conforms to Directive 2014/53/EU.
The full wording of the EU Declaration of Conformity is available for downloading from
the following Internet address: http://www.steinel.de
11� Manufacturer's Warranty
This Steinel product has been manufactured with utmost care, tested for proper
operation and safety and then subjected to random sample inspection. Steinel guar-
antees that it is in perfect condition and proper working order. The warranty period
is 36 months and starts on the date of sale to the consumer. We will remedy defects
caused by material flaws or manufacturing faults. The warranty will be met by repair
or replacement of defective parts at our own discretion. The warranty shall not cover
damage to wear parts, damage or defects caused by improper treatment or mainte-
nance. Further consequential damage to other objects shall be excluded.
Claims under the warranty will only be accepted if the unit is sent fully assembled and
well-packed with a brief description of the fault, a receipt or invoice ( date of purchase
and dealer's stamp ) to the appropriate Service Centre.
Repair service:
If defects occur outside the warranty period or are not covered by the warranty,
ask your nearest service station for the possibility of repair.
3
Y E A R Y E A R
MANUFACTURER'S MANUFACTURER'S
WARRANTY WARRANTY
5
Y E A R
MANUFACTURER'S
WARRANTY
21