Atlas Copco RBB 04SP-06 Produktanweisungen Seite 5

RBB 04SP-06
To prevent gradual loss of hearing due to exposure to high noise levels:
■
wear ear protection
7 Vibration may be harmful to hands and arms
■
use vibration dampened tools if available
■
reduce the total time of exposure to vibrations, particularly if the operator has to guide the chisel by
hand
8 Dust generated during operation may be harmful
■
use spot suction or a breathing apparatus
Proper use and maintenance
9 Do not perform idle blows with a hammer
■
they will cause high internal stresses and shorten the life of the tool
■
note the risk of shooting out the chisel, die or punch if the retainer is not in order
10 Quick coupling
■
if a quick coupling is used on a percussive tool, it shall be separated from the tool by a whip hose
(length 0.5 m)
11 Maintenance
Good service life and safe function is offered if the instructions for lubrication, maintenance and overhaul
supplied with the machine are followed.
Use genuine Atlas Copco replacement kits and parts only.
Warning
Comply with local safety regulations - protectect your eyes and hands.
Before any adjustment operation e.g. changing of accessories - disconnect the tool from the air line.
Handling
Handling
When fitting the dolly and daily - smear the o-ring or o-ring groove with grease (Molykote recommended).
Turn the rod and pass it into one of the 6 possible positions.
EN
© Atlas Copco Industrial Technique AB - 9836 9740 00
Safety and operating instructions
5