Atlas Copco RBB 04SP-06 Produktanweisungen Seite 4

Safety and operating instructions
■
remove chisel, die or punch from machine when work is over
■
before changing accessories, chisel or die - disconnect the machine from the air supply
■
release the start and stop device in case of interruption of energy supply
■
when finishing a job, disconnect the machine from its air supply
2 Chips and sparks shall be prevented from striking an eye or another worker
To prevent vision loss:
■
always wear eye protection
■
isolate work of this kind by using barriers between work stations
■
do not use the machine for other purposes than it is intended for
3 Prevent body injury by using:
■
gloves
■
protective shoes
■
helmet
■
always wear eye protection
4 Explosive atmosphere must not be ignited
To prevent injury and property loss from fires:
■
use other technique
■
use accessories of non sparking material (e.g. needle attachment of Beryllium copper for a needle
scaler)
5 Electric chock may be fatal
■
avoid chiselling into electric wiring hidden inside walls etc.
Long term risks when using the machine
6 Always use ear protection
4
EN
© Atlas Copco Industrial Technique AB - 9836 9740 00
RBB 04SP-06