imilab EC3 Bedienungsanleitung Seite 6

Connecting
•Turn on the camera
Insert the power supply cable into the camera's
Connect the other end Of the power supply cable to a power source.
• Indicator Light
Steady blue on: connected/device
Flashing blue: network
Flashing orange
Flashing orange
•Insert a microSD
Ensure that the camera
disconnected from the power supply.
Use a screwdriver
protective case and expose the
microSD card slot. The contact points
Of the microSD card should be facing
the same direction
Insert the microSD
Note:When inserting or removing the microSD card, please disconnect the camera
from the power supply. please use a microSD card from a reputable
The recommended
• Restoring Factory Settings
In case of changing
the Xiaomi Account in the Mi Home/Xiaomi
is paired with, press and hold the reset button for about three
seconds until the indicator
restored to factory settings, and then reconnect
app.
Note: Restoring factory settings will not delete the content on the
microSD card.
the Device
error
rapidly: waiting
slowly: system upgrade
card
is
to remove the
as the camera.
card into the
read and write speed of the microSD card is at least IJI /Class 10.
the network
blinks orange
status is normal
for connection
in progress
slot.
that the camera is connected
Home app that the camera
rapidly,
EN-OA
power supply port.
manufacturer.
to or
so that the camera is
the camera with the