Silvercrest SRR 3.7 A1 Bedienungs- Und Sicherheitshinweise Seite 19

Never immerse the product, the cable and the power adapter in water
or other liquids during corded use or rinse under running water.
Always switch off the product before cleaning it.
Never clean the shaving unit of the head assembly
Do not use any other liquids.
Do not use aggressive or abrasive cleaning agents.
Store the product in the protective pouch
for extended periods.
Note: Do not put the product to direct sunshine or heat. The ideal
ambient temperature is between -10 and +60 °C. Extreme low or
high temperature may damage the battery or the product.. Suggest
to charge the product at least 60 minutes when you wanted to store
the item more than 6 months etc.
Note: Household acid-free sewing machine oil can be used for the care/
maintenance of the moving shearing parts.
Cleaning the shaving head dry
Clean the shaving heads
after every use.
Pull out the shaving head
Carefully tap the shaving unit to clean it.
Use the cleaning brush
Clean the outer surfaces of the shaving head
damp cloth.
Cleaning the shaving unit wet
The shaving heads
water.
with the included cleaning brush
1
(ref. to Fig. E)
1
to clean any leftover hair.
16
of the head assembly
1
with water.
3
if it will not be used
15
with a slightly
1
can be cleaned with
3
GB/IE/NI
16
19