Silvercrest SRR 3.7 A1 Bedienungs- Und Sicherheitshinweise Seite 12

For added protection we recommend installing
a residual current operated device (RCD) with
a rated trigger current not to exceed 30 mA in
the electrical circuit. Consult an electrician.
The RCD must be installed by an electrician.
Do not use the product if the product, the power
adapter or the cable shows damage or if the
product has been dropped.
Do not plug in the power adapter until the
connector plug is connected to the product.
Only plug the power adapter into a properly
installed, easily accessible mains socket with
a voltage that corresponds to the information
on the type plate. The mains socket must also
be easily accessible after the product has been
plugged in.
Ensure the power cable will not be damaged
by sharp edges or hot surfaces.
Ensure the power cable will not be pinched or
crushed.
Always unplug the product by the power
adapter, never the cable.
12 GB/IE/NI