6B Single Number Rating; Storage And Transport - Edelrid X3Hm Bedienungsanleitung

APV-Value (dB): Assumed protection value (dB)

6b SINGLE NUMBER RATING

Size Range: (s) small / (m) medium / large
SNR: 31dB H:35dB M:29dB L:22dB
SNR (dB) / s / m: Single Number Rating (dB)
H84 (dB) / s / m : High-frequency attenuation value
M84 (dB) / s / m : Middle-frequency attenuation value
L84 (dB) / s / m : Low-frequency attenuation value

7 STORAGE AND TRANSPORT

Use a protective case for storage and transport. Store
away from water, UV radiation, mechanical stress, chem-
icals, and dirt.
8 MAINTENANCE
Standard alcohol-based disinfectants (e.g., isopropanol)
can be used when needed. Regularly lubricate metal
joints with acid-free oil or PTFE- or silicone-based prod-
ucts after cleaning. Do not immerse in liquids. Regularly
inspect for the need for maintenance or replacement.
LIFESPAN AND REPLACEMENT
9a Maximum Lifespan in Years. The maximum lifespan is
the period from the manufacturing date to the end of
usability. Products made of synthetic fibers (polyam-
ide, polyester, Dyneema
ject to aging even without use. Lifespan depends
mainly on exposure to UV radiation and other climatic
conditions. Aramid fibers have low UV resistance and
should not be exposed to prolonged sunlight.
The product may be negatively affected by certain
chemicals. Contact the manufacturer for further in-
formation.
9b Maximum Usage Period in Years. The usage period is
the time from first use to the end of usability, assum-
ing proper use without visible wear and optimal stor-
age conditions. After this period, or after the maxi-
mum lifespan, the product must be removed from
service.
Frequent use or extreme stress may significantly reduce
the lifespan.
, aramid, Vectran ) are sub-
® ®
Check for damage or improper functioning before use.
The product must be discarded immediately and handed
over to a competent person or the manufacturer for in-
spection and/or repair if (this list is not exhaustive):
- safety concerns arise.
- signs of damage are visible (e.g., cracks, deformation).
- material shows severe corrosion or has been exposed
to chemical substances.
- metal parts exhibit heavy wear.
- closure mechanisms fail to operate.
Inspect earmuffs and particularly the sealing cushions
for cracks and leaks regularly.
Replace the sealing cushions when necessary or at least
every 6 months, and the foam inserts for hygiene rea-
sons.
To change the cushions with back plate, reach into the
ear opening of the hearing protector and pull the back
plate firmly off the capsule. Replace the back plate to-
gether with the ear pads and retaining ring (all pre-as-
sembled) and press them firmly into place. The new
cushions should match the originals.
INSPECTION AND DOCUMENTATION
9c For commercial use, the product must be inspected
regularly, at least once every 6 months, by the manu-
facturer, a competent person, or an authorized in-
spection body. Inspections must include checking
the legibility of product markings and documenting all
findings. Required details:
Product marking and name, Manufacturer details,
Unique identification, Manufacturing date, purchase
date, and date of first use, Scheduled inspection date
and results, Signature of the competent person. A
suitable template is available at edelrid.com.
10 Operating Temperature in Dry Conditions. Heat, cold,
moisture, ice, oil, and dust can impair function.
11 Contact Information: If you have questions, contact
us. Contact details are provided on the back. Updat-
ed instructions are available at edelrid.com.