Ventilation
Set up the device in such a way that adequate ventilation is ensured in order to prevent
•
heat form building up inside the device.
Always keep a minimum distance of 10 cm from other objects or walls.
•
3.
Unpack device and start operation
The rubber feet of the device may produce stains on certain surfaces. Use a suitable
•
surface.
Do not use any media other than those specified in this manual.
•
Never use any power cables other than those premised. Using the wrong power
•
supply will damage your device.
To maintain the compliance with the WiFi RF exposure requirement, place the product
•
at least 20 cm (8 inches) from nearby persons except when operating the controls.
3.1 In case of defects
If the device develops a defect, do not attempt to repair it on your own.
•
If the power plug, adapter or power cable of this device is damaged, they must be
•
replaced by the manufacturer or the manufacturer's customer service department to
prevent risk of electric shock.
Should any fluid enter the device, or if the device has been dropped or otherwise
•
damaged, have it checked by an authorised dealer. Immediately disconnect the
device from the power supply and contact an authorised dealer as soon as possible.
4.
Disposal at end of useful life
Do not dispose of in household waste
Devices that are marked with this symbol (see figure) should not be disposed of in
household waste. They must be returned to a collection point for the recycling of electrical
and electro-technical devices. Information regarding the disposal of old equipment can be
obtained from your municipality, local waste disposal company and the store where you
purchased this device. Proper disposal of old devices prevents environmental damage and
does not jeopardise your health.
Batteries may contain toxic heavy metals and are subject to hazardous waste treatment.
Return the batteries to a municipal collection point or have them disposed of by a specialist
company.
© sonoro audio GmbH 2024
GB
15