Hama Premium Bedienungsanleitung Seite 7

3. Display
The "Premium" energy cost meter can show seven different displays These are listed below
1st display
Measured time
Consumption"W"
Energy costs "COST"
4th display
Measured time
Amperage "A"
"POWER FACTOR"
7th display
Measured time
Price per kilowatt hour
"COST/KWh"
4. Important Notes:
f you connect an electrical consumer exceeding 3,680 W to the energy cost meter, the word OVER-
LOAD appears on the middle line.
Pressthe "COST" buttonto go directly to the 7th display.
The "UP" and "DOWN" buttons have no function during normal operation They are only used to
enter the electricity price on the 7th display
2nd display:When measurementoccurs over a period Oftime longerthan 24hours, the time rolls over
and continues from 00:00, b ut the day indicator on the third line increases by 1.
Youcan reset the display by pressing the RESET button (all valueswill be deleted).
f your energy cost meter no longer respondsto button entries or the indicators on the display differ
from normal,you can also pressthe RESET button to restore the device to an operational state.
5. Technical Specifications:
Connection values: 230 V/50 Hz/16 A
Maximum consumption Of connected devices: 3,680 W
Device power consumption: < 0.5W
Operating temperature: +5 oc to +40 oc
Accuracy: +1-2%
2nd display
Measured time
Power "KWh"
"DAY"
5th display
Measured time
Minimum consumption "W"
Lo
3rd display
Measured time
Voltage "V"
Frequency "Hz"
6th display
Measured time
Maximumconsumption "W"
7