Neonate BC-6900D Bedienungsanleitung Seite 9

Adjusting the microphone sensitivity of the baby
unit(s)
The baby unit must be turned on.
Baby unit: Use the "+/-" buttons to adjust the sensi-
1
tivity of the microphone. The MIC SENS bar graph at
the bottom of the display will be adjusted at the same
time to show the current microphone sensitivity. When
sensitivity is turned up, lower sounds will be detected
easier. When the sensitivity is turned down, the sound
has to be louder for the microphone and thereby the
baby unit to be activated.
Adjusting the speaker volume of the baby unit
The speaker volume of the baby unit is relevant when the
talkback function is used on the parent unit.
The baby unit must be turned on.
Baby unit: Press the "M" button once. The speaker
1
icon will appear instead of the MIC SENS icon in the
lower left corner on the display.
Baby unit: Use the "+/-" buttons to adjust the volume.
2
The MIC SENS icon will reappear after 5 seconds.
Adjusting the microphone sensitivity of the baby
unit(s) through parent unit
The baby unit and the parent unit must be turned on and
connected.
Parent unit: Press and hold the "M" button for 2
1
seconds. SLEEP TIMER will appear steady and ON or
OFF will be flashing in display.
Parent unit: Press the "M" button once. The display
2
changes from SLEEP TIMER to MIC SENSE.
Parent unit: Use the "+/-" buttons to adjust the sensi-
3
tivity of the microphone. The MIC SENS bar graph at
the bottom of the display on the baby unit will be ad-
justed at the same time to show the current microphone
sensitivity. When sensitivity is turned up, lower sounds
will be detected easier. When the sensitivity is turned
down, the sound needs to be louder for the microphone
and thereby the baby unit to be activated.
Parent unit: Press the "M" button to confirm chosen
4
microphone sensitivity and to return to standby mode
screen.
Using the talkback function (two-way communication)
The baby unit and the parent unit must be turned on and
connected.
Parent unit: Press and hold the "talk back" button
1
while speaking to baby(unit). Release the button to re-
open communication from baby- to parent unit again.
You can select which baby unit you are talking to (up to
three different) by pressing the "BU#" button until the
correct baby unit is selected.
Turn on night light in baby unit / Change to voice
activated (VOX) night light
Baby unit: Set the ON/OFF switch to "ON with night
1
light" position.
Baby unit: Press the "Night light VOX" button to
2
change if the night light should be on constantly or
voice activated (VOX).
Using sleep TIMER function to record sleeping time –
how to activate, deactivate, reset and check recorded
sleeping hours.
Sleep TIMER function can be activated, deactivated or reset
on either baby or parent unit.
Baby unit: Press and hold "TIMER" button for 2
1
seconds to activate or deactivate TIMER function.
To reset TIMER function press shortly on "TIMER"
button.
Parent unit: Press and hold the "M" button for 2
2
seconds. SLEEP TIMER will appear steady and ON or
OFF will be flashing in display.
Parent unit: Use the "+/-" buttons to turn the TIMER
3
function on or off
Parent unit: Press the "M" button to confirm your
4
choice.
To check earlier recorded sleeping hours, press "M" button
on Parent unit shortly and scroll with "+/-" buttons.
9