Midea 7NP30T0BL Gebrauchsanleitung Seite 95

▲
Caution!
While the appliance door is well installed, the door cover can also be
taken off, by this time.
1. Removing the door cover means to set the inner glass of the
appliance door free, the glass can be easily moved and cause
damage or injury.
2. As removing the door cover and inner glass means to reduce the
overall weight of the appliance door. The hinges can be easier to
be moved when closing the door and you may be trapped. Keep
your hands away from the hinges.
Because of the 2 points above, we strongly recommend you not to
remove the door cover unless the appliance door removed. Damage
caused by incorrect operation is not covered under warranty.
▲
Rails
When you want have a good cleaning for the rails and cavity, you can
remove the shelves and clean it. In this way your appliance will retain
its appearance and remain fully functional for a long time .
1. Pull the front part of the side rails horizontally to the opposite
direction until the feature
shelves out like the picture below.
2. To put the side rails back to the cavity, to make the back part of
the shelves insert into the holes of cavity rightly first of all , then
insert the feature
gets out; Later on you can remove the
1
back into the cavity.
1
1
2
EN-37
3