Siguro SGR-RV-M300B Bedienungsanleitung Seite 26

EN
Problem
Side brush keeps falling
out.
Vacuum cleaner cannot
find and park in charging
station.
Vacuum cleaner returned
to charging station before
cleaning was completed.
Cause
Side brush not attached
correctly.
Charging station not posi-
tioned correctly.
Charging station not
plugged in.
Charging station was
moved while vacuum was
cleaning.
Cleaning has been inter-
rupted.
Vacuum cleaner was start-
ed away from charging
station.
Path to charging station
blocked by foreign object.
Charge level fell too low
and vacuum cleaner need-
ed to recharge.
Too many obstacles on the
cleaning route that the
vacuum cleaner has to go
around or under which it
cannot clean.
EN - 14
Solution
Remove the side brush
and attach it to the pin at
the bottom of the vacuum
cleaner. Correct locking is
indicated by a click.
Position the charging
station so it is freely acces-
sible.
Keep the charging station
plugged in.
Do not move the charging
station during cleaning.
Start the vacuum and let
it finish cleaning. The vac-
uum cleaner will seek the
charging station and park
itself there.
Only start the vacuum
cleaner when parked in the
charging station.
Remove foreign objects
that prevent the vacuum
cleaner from parking in the
charging station.
Let the vacuum cleaner
charge. It will resume
cleaning once charged.
Before cleaning, arrange
room(s) so that the vac-
uum cleaner can clean
the maximum amount of
space.