Cleaning And Maintenance - Siguro Sgr-Rv-M300B Bedienungsanleitung

• prompted to do so in the app;
• automatic and manual addition of the vacuum to the in-app device list both failed;
• your Wi-Fi password changed;
• your Wi-Fi configuration changed;
• you need to associate the device with a different user account.
Announcement Volume and Language
Some of the vacuum cleaner's actions are accompanied by voiced reports. The default
reporting language is English. You can change the reporting language and volume or
turn verbal reporting off in the app.
App Features
The app contains advanced settings for the vacuum cleaner, cleaning modes, etc. Con-
trols available in the app include:
• switch between simple vacuuming and vacuuming with floor wiping;
• operating mode selection – low noise / standard / high power;
• cleaning mode selection: cleaning by room, local area cleaning, spot cleaning, etc.;
• setting restricted areas and virtual walls;
• home map creation, real-time update and reset;
• scheduled cleaning;
• setting the water flow rate for floor wiping;
• "Do Not Disturb" mode;
• warning and error messages, etc.

CLEANING AND MAINTENANCE

Before any cleaning or maintenance, first power off the appliance and unplug the
adapter from the wall socket.
For best cleaning efficiency and service life, the vacuum should be cleaned after each
use.
Warning:
Never immerse the appliance, charging station, or adapter in water or
other liquids.
Never clean any part of the appliance with plastic or metal scrapers, harsh cleaners,
chemicals, hydrocarbon cleaners, solvents, or similar substances. The surface finish
could be seriously damaged.
Rotary Brush Cleaning (Fig. F)
1. Remove the brush from the vacuum cleaner and clean it using the brush provided.
2. Heavily soiled brushes should be rinsed in running water, then set out to dry. If a
brush has bent bristles, straighten them by immersing the brush in warm water.
3. Only remount the brush on the vacuum once completely dry.
4. If the rotary brush is damaged or worn, replace it with a new one.
Cleaning the Dust Container and HEPA Filter
Empty the dust container after each use or, if necessary, during use. In the latter case,
always make sure the vacuum cleaner is off. The app will display a full dust container
warning.
EN - 11
EN