Mobile App Control; Downloading The App - Siguro Sgr-Rv-M300B Bedienungsanleitung

EN
If the tank needs to be refilled, always stop the vacuum cleaner before removing the
tank.
Avoid using an overly soaked rag; the wheels might slip on its trail otherwise.
Note:
We recommend keeping the (empty) water tank installed in the vacuum
cleaner even when not using it. The mop holder, however, should only be
installed immediately before use.
Warning:
The wet cleaning attachment is not designed to clean carpets.

MOBILE APP CONTROL

The vacuum can also be controlled through an app from a smartphone or tablet.

Downloading the App

1. Download and install the Tuya Smart app. A QR code is provided for this purpose
on one of the preface pages of this manual.
2. The vacuum can only communicate over Wi-Fi at 2.4 GHz. If your router is equipped
with 5 GHz Wi-Fi, make sure to have it set to 2.4 GHz mode.
3. Create an account and log into the app.
4. The app has a step-by-step wizard to help you with installation, registration and
login.
Automatic Device Addition
1. Turn on your vacuum.
2. In the app, tap the "+" at top right, then select "Add Device".
3. Available device search will start.
4. Tap the robotic vacuum cleaner icon.
5. On the next screen, select the Wi-Fi network and enter your password. Tap "Next".
6. The vacuum cleaner will be automatically added to the device list. Tap "Done" to
display the vacuum cleaner controls.
Manual Addition
1. Turn on your vacuum.
2. In the app, tap the "+" at top right, then select "Add Device".
3. Swipe down on the screen to the "Add Manually" option. On the next screen, select
"Small Appliances", then "Robotic Vacuum Cleaner (Wi-Fi)".
4. On the next screen, select the Wi-Fi network and enter your password. Tap "Next".
5. If prompted to reset Wi-Fi, press and hold
The button backlight will flash. In the app, confirm the buttons are flashing.
6. The vacuum cleaner will be automatically added to the device list. Tap "Done" to
display the vacuum cleaner controls.
Wi-Fi Reset
To reset the built-in Wi-Fi module, press and hold
simultaneously for 3 seconds. A chime will sound and the Wi-Fi module will reset.
Reset Wi-Fi when:
and simultaneously for 3 seconds.
and on the vacuum cleaner
EN - 10