Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The clock will now no longer receive the radio signal. Set the time manually as
described in basic settings.
Radio signal reception can be restarted by pressing -/RCC OFF 11 on the backside
of the clock for 4 seconds and the radio tower
4 will blink on the display. This
process can take from 3 to 10 minutes.
If radio reception fails, the time must be set manually (see basic settings).
Reception problems
The DCF77 radio signal is transmitted from a location near Frankfurt am Main and
can be received within a radius of approximately 1500 km around Frankfurt am
Main. However, there are some obstacles and sources of interference, which may
substantially hinder reception. If your alarm clock does not correctly receive the
DCF77 radio signal, please hang or place the alarm clock at a different location at
your site. Please note that devices such as computers, telephones, radios and
televisions may cause electromagnetic radiation which can interfere with the DCF77
signal reception. Other possible detriments to reception are: strong building
insulation (metal building materials), nearby mountains or atmospheric interference.
It may also be necessary to replace the batteries.
Light
Press
-button 2 on the top of the clock to briefly activate the
light.
Speed setting
When setting numerical settings, press and hold the relevant button to use the speed
setting feature.
Basic settings
The following settings are possible: Hours of the time, minutes of the time, year,
month, day, language of the day of the week display (DE – German, Fr – French, IT
– Italian, DU – Dutch, ES – Spanish, DA – Danish, En – Englisch), 12/24 -hour time
format and time zone.
Press and hold MODE 9 for 3 seconds during normal time display. The hours of the
time will blink and can be set by pressing + 10 or -/RCC OFF 11. Press MODE 9 to
confirm your setting. Set the minutes of the time, year, month, day, language of the
day of the week (DE, Fr, IT, DU, ES, DA, En), 12/24 -hour time format and time
zone in the same way.
Alarm
The alarm clock has 2 alarm times, which can bet set separately.
Press and hold ALARM 1 or 2 to enter the alarm time setting mode. The hours of
alarm ALARM 1 or 2 will blink on the display. Press + 10 or -/RCC OFF 11 to set
the hours and press ALARM 1 or 2 to confirm your setting. Set the minutes and the
second alarm time in the same way.
Activating or deactivating the alarm
Press ALARM 1 or 2 during normal time display to activate the
alarms.
Press ALARM 1 or 2 again to activate the vibration,
press ALARM 1 or 2 repeatedly to activate both alarms (sound and
vibration),
press ALARM 1 or 2 again to deactivate both alarms.
If an alarm sound is activated, the bell symbol
and/or
will
appear.
- 32 -
Werbung
