Ego Power+ BCA1200 Bedienungsanleitung Seite 9

Measured sound power level L
WA
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(measured according to 2000/14/EC)
Front-assist handle
Valuation of
vibration a :
h
Rear handle
◾
The above parameters are tested and measured
equipped with power head PH1400E/PH1420E/
PHX1600;
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
96.5 dB(A)
power tool can differ from the declared value in which the
K=1.88 dB(A)
tool is used; In order to protect the operator, user should wear
(PH1400E)
gloves and ear protectors in the actual conditions of use.
93.2 dB(A)
K=0.35 dB(A)
Recommended Blade
(PH1420E)
PART NAME
91 dB(A)
K=1.1 dB(A)
Brush Butter Blade
(PHX1600)
84.5 dB(A)
K=3 dB(A)
PACKING LIST
(PH1400E)
PART NAME
83.9 dB(A)
K=3 dB(A)
Brush Cutter Attachment
(PH1420E)
Blade and Blade Sheath Set
83 dB(A)
Guard
K=3 dB(A)
Guard Accessory (For use with trimmer
(PHX1600)
head ONLY)
98 dB(A)
WA
Hex Wrench
Multi-Function Wrench
2.8 m/s
2
K=1.6 m/s
2
Operator's Manual
(PH1400E)
4.14 m/s 2
DESCRIPTION
K=1.5 m/s
2
(PH1420E)
KNOW YOUR BRUSH CUTTER ATTACHMENT (Fig. A)
6.64 m/s
2
K=1.5 m/s
2 1. End Cap
(PHX1600)
2. Brush Cutter Shaft
3. Guard
3.1 m/s
2
4. Blade
K=1.6 m/s
2
5. Blade Sheath
(PH1400E)
6. Clamp Wire
1.88 m/s
2
7. Sealing Screw
K=1.5 m/s
2
8. Gear Case
(PH1420E)
9. Shaft-locking Hole
2.61 m/s
2 10. Outer Flange
K=1.5 m/s
2
11. Multi-Function Wrench
(PHX1600)
12. Hex Wrench
13. Guard Accessory (For use with trimmer head ONLY)
firmly in place. The guard must always be on the tool to
protect the user.
equipped with a trimmer head, the guard accessory
should be mounted onto the guard. Failure to comply could
result in an overly long cutting line and motor overload.
BRUSH CUTTER ATTACHMENT — BCA1200
The vibration emission during actual use of the
WARNING:
Never operate the tool without the guard
WARNING:
When the tool is used as a line trimmer,
EN
MODEL NUMBER
ABB1203
QUANTITY
1
1
1
1
1
1
1
9